- No products in the cart.
LIQUID ULTRA WHITE - 500gm
Rs. 1,000.00
Extra white colour glue to fill the joints, holes and for the repair of marble and other natural stone. 500gm gw.
Description
Liquid Ultra White is a creamy, easy-to-apply adhesive designed for marble and similar natural stone applications. Its extra white colour makes it suitable for repairs and filling work where a clean finish is required. The liquid consistency allows smooth application for filling marble joints, holes, and smaller pores, while its strong grip helps hold the material firmly in place. Once cured, it develops a hard, polishable finish that can be further refined to match the surrounding stone. The colour can also be adjusted using a suitable colouring paste when closer shade matching is required. The product is particularly suitable for horizontal applications, including slab bonding and small reconstruction work. A hardener is included with the product for use during application.
Method of use
- Grind the surface with 60 grit of abrasive or 50 grit of polishing pad.
- Thoroughly clean and dry the surface.
- Take from tin necessary amount of resin, using clean tools and add 1-2% of hardener.
- Stir & mix them nicely and apply on the surface to be treated. Take the quantity of resin which can be applied in 3-4 minutes at a time.
- It start to gel in 4-5 minutes and dries completely in 30 minutes.
- Start grinding the floor 24 hours starting from grit 120 of abrasive or 100 of polishing pad.
- Do not return unused catalyzed glue back to the tin.
- After use, close the tin in order to avoid hardening of glue on contact with air.
Product Information
| Product Name | Liquid Ultra White |
| Pack Size | 500 g |
| Colour | Extra White |
| Consistency | Liquid / Creamy |
| Application | Horizontal applications |
| Suitable For | Marble and similar natural stone |
| Finish | Hard and polishable |
| Hardener | Included |
| Colour Adjustment | Possible with colouring paste |
| Main Uses | Filling, bonding, repair, and small reconstruction work |
Key features
- Extra White Colour: Provides a bright white base for marble filling, repair, and bonding applications, creating a clean and uniform appearance.
- Liquid and Creamy Consistency: Allows smooth spreading and easy application for filling marble joints, holes, smaller pores, and minor surface imperfections.
- Strong Grip: Provides firm adhesion between marble and similar natural stone surfaces for reliable bonding during repair and reconstruction work.
- Hard Finish After Curing: Develops a hard finish after curing, making it suitable for filled joints, repaired areas, holes, and reconstruction applications.
- Polishable Finish: Can be polished after curing to create a smoother surface and help the repaired area blend with the surrounding stone.
- Colour Can Be Adjusted with Colouring Paste: Allows colour adjustment using colouring paste to achieve a closer shade match with the surrounding marble surface.
- Suitable for Horizontal Applications: Suitable for horizontal marble applications, including slab bonding, joint filling, pore filling, and surface repair work.
- Hardener Included: Includes a hardener for preparing the resin before application and achieving the required curing and finishing characteristics.
Applications
-
Filling Marble Joints
Suitable for filling joints between marble pieces and slabs, helping close visible gaps and create a more even surface before final finishing, polishing, or further stonework.
-
Filling Holes in Marble
Can be applied to fill holes, cavities, and surface imperfections in marble, creating a smooth repaired area that can be finished and polished after the material cures.
-
Filling Smaller Pores
Its liquid and creamy consistency allows the material to enter smaller pores and surface voids in marble, helping create a more uniform appearance before polishing or finishing.
-
Small Reconstruction Work
Suitable for small reconstruction work where damaged, chipped, or missing sections of marble require filling and rebuilding to restore the shape and appearance of the stone.
-
Gluing Horizontal Slabs
Can be used for bonding horizontal marble slabs, providing a strong adhesive connection between compatible stone surfaces during installation, repair, or other horizontal stonework applications.
-
Repairing Marble and Similar Natural Stone
Suitable for minor repairs on marble and similar natural stone surfaces, including small cracks, holes, chips, and damaged areas requiring filling, bonding, or reconstruction.
How to Apply Liquid Ultra White
Step 1: Prepare the Surface
Clean the marble or natural stone surface thoroughly and remove dust, dirt, grease, and loose material. Make sure the area is dry before application.
Step 2: Prepare the Product
Take the required quantity of the resin and mix it with the supplied hardener according to the manufacturer's recommended ratio.
Step 3: Mix Thoroughly
Blend the resin and hardener until the mixture is consistent throughout. If colour adjustment is required, add a suitable colouring paste during preparation.
Step 4: Apply to the Area
Apply the prepared mixture to the joint, hole, pore, damaged section or bonding surface using a suitable application tool.
Step 5: Allow to Cure
Leave the applied material undisturbed and allow it to cure completely before carrying out further finishing work.
Step 6: Finish and Polish
Once fully cured, remove excess material if required and polish the repaired or filled area to achieve the desired finish.
Handling & Storage Instructions
- Store the product in a cool, dry, and well-ventilated place.
- Keep the container tightly closed when not in use.
- Keep away from direct sunlight and excessive heat.
- Avoid contact with moisture during storage.
- Handle the resin and hardener carefully and follow the product safety instructions.
- Use suitable protective gloves and other recommended personal protective equipment during handling.
- Keep the product away from children and unauthorized users.
- Do not use the product beyond the manufacturer's recommended storage period.
- Follow the manufacturer's instructions for safe disposal of unused product and packaging.
Why Buy Liquid Ultra White from Stonera?
Extra White Colour
A bright white formulation makes it a suitable choice for lighter marble, especially when you want repaired joints, filled areas, or bonded sections to maintain a clean appearance.
Strong Grip
For bonding and repair work where a firm hold matters, liquid ultra-white marble adhesive provides a strong grip to help keep marble and similar natural stone surfaces securely joined.
Hard & Polishable Finish
The cured material develops a hard surface that can be polished, making it easier to achieve a refined finish that complements the surrounding marble.
Easy Liquid Application
Its creamy liquid consistency gives you better control while working on joints, holes, pores, and smaller repair areas, making routine marble work more convenient.
Colour Matching
Not every marble surface has the same shade. The option to adjust the colour with colouring paste helps achieve a closer visual match during repairs.
Multiple Marble Applications
One product can cover several common requirements, from filling joints and pores to repairing holes, bonding horizontal slabs, and carrying out small reconstruction work.
Resin +amp; Hardener Included
Both essential components are supplied together, so you have the resin and hardener required to prepare the adhesive without having to source them separately.
Long-Lasting Finish
Once properly applied and cured, the material leaves a hard surface that can be finished and polished, helping completed marble work retain a neat appearance.
FAQs
Liquid Ultra White is used for filling marble joints, holes, and smaller pores, as well as small reconstruction, bonding, and repair work on marble and similar natural stone.
Yes. It is suitable for small marble repair and reconstruction applications where filling, bonding, or restoring a damaged section is required.
Yes. It can be used to fill joints in marble and create a hard, polishable surface after curing.
The resin and supplied hardener should be mixed according to the manufacturer's specified mixing ratio. Refer to the product packaging or technical instructions for the exact ratio before application.
The curing time depends on the application conditions and the manufacturer's specified formulation. Refer to the product packaging or technical data for the recommended curing time before polishing or further finishing.
Yes. Once the material has cured sufficiently, its hard finish can be polished to achieve a smoother and more refined surface.
RELATED PRODUCTS
Close
Ultra White
Black
Beige
Sand Stone
Light Orange
Light Grey
Ivory
Chocolate Brown
Dark Grey
Pale Cream
Golden Yellow
Blue
Coffee Brown
Signal Red
Leaf Green
Off White
