- No products in the cart.
Previous product
Back to products
Back to products
G8 TRANSPARENT
Rs. 7,920.00
Next product
G8 NERO
Rs. 7,920.00
S748 – PREMIUM STONE STAIN PROTECTION & COLOUR ENHANCER - 1L
Rs. 11,760.00
Special impregnator that reduces the penetration of water, dirt, oil and grease in all natural and artificial stone surfaces. 1 Litre.
Description
Protect and enhance your stone with S748 from StoneraShop. Shop the 1L stone impregnator for lasting stain protection, colour enhancement, and professional care across suitable stone surfaces.
Method of Application
- Apply S748 generously and evenly onto the clean and dry surface using a soft brush or short pile roller.
- Leave for 20-30 minutes, but do not allow S748 to begin to dry..
- Afterwards, immediately and completely remove excess S748 using paper towels and rub the surface dry
- Repeat the treatment after approx. 24 hours.
- Buff the surface by using cotton cloth and woolen buffing pad.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
| Country of Origin | MOELLER |
| Color | Clear |
| Form | Liquid |
| Unit pack | 1 Litre |
| Category | Stain protection premium colour |
Key features
- S748 is suitable for all absorbent natural and artificial stones, such as polished, honed or textured marble, limestone, travertine, solnhofen slabs, granite, gneiss, terrazzo, agglomerate marble etc.
- It is UV resistant and does not yellow with age..
- The effect of product like cola, wine and fruit juice is drastically reduced by the use of S748.
- For regular cleaning and continued protection use diluted ‘P324 Liquid Stone Soap’ once or twice a week.
- Once dry the residual material is not hazardous to health and is approved for use with food-stuffs by the LFGB (German Food and Feed Code).
- Non-absorbent surfaces, such as glazed tiles and the like, cannot be treated with this product.
S748 Stone Stain Protection & Colour Enhancement
S748 is a ready-to-use stone impregnator designed to reduce the penetration of water, dirt, oil, and grease while enhancing the colour and natural structure of stone. It is suitable for natural and artificial stone surfaces, including marble, limestone, granite, gneiss, travertine, Solnhofen stone, terrazzo, and agglomerate marble.
The treatment can be used on polished, honed, and textured surfaces for both interior and exterior applications. Its UV-resistant formulation is designed not to yellow with age, helping treated surfaces retain their enhanced appearance while providing protection against everyday staining and moisture penetration.
S748 for Marble, Granite & Natural Stone
Marble & Limestone
S748 helps reduce water, dirt, oil, and grease penetration into absorbent marble and limestone while enhancing their natural colour and structure without changing the stone’s surface finish.
Granite & Gneiss
Suitable for granite and gneiss, S748 provides impregnating protection against common staining substances while enhancing the stone’s natural colour and structure on polished, honed or textured surfaces.
Travertine & Solnhofen Stone
S748 can be applied to absorbent travertine and Solnhofen stone, helping reduce the penetration of moisture, dirt, oil and grease while bringing out their natural colour.
Terrazzo & Agglomerate
The impregnating treatment is suitable for terrazzo and agglomerate marble, helping limit the penetration of staining substances while enhancing colour and the visible structure of the treated surface.
S748 Colour Enhancing Stone Impregnator
S748 combines impregnating protection with colour enhancement for absorbent stone surfaces. The ready-to-use treatment penetrates the stone rather than forming a conventional surface coating, helping reduce the penetration of water, dirt, oil and grease.
It also enhances the stone’s colour and structure, making natural characteristics appear more pronounced. S748 is suitable for polished, honed, and textured surfaces and can be used indoors or outdoors. Its UV-resistant formulation is designed not to yellow with age, making it suitable where both protection and appearance are important.
How to Apply S748 Stone Impregnator
Prepare a Clean & Dry Surface
Ensure the stone is thoroughly clean, dry, and free from dirt, dust, residues, and other contaminants before applying S748 for consistent and effective treatment.
Apply S748 Evenly
Apply S748 evenly across the prepared stone surface, making sure the product is distributed consistently without leaving untreated areas or excessive product accumulation.
Allow 20–30 Minutes
Allow S748 to remain on the surface for 20–30 minutes. During this time, do not allow the product to dry completely.
Remove Excess Product
Remove any excess S748 from the surface before it dries. This helps prevent unwanted residue and leaves the stone ready for the next application step.
Repeat After 24 Hours
After approximately 24 hours, repeat the application to provide the recommended treatment. Follow the product instructions for proper coverage and application.
Buff the Surface
Once the treatment has been applied and excess product removed, buff the treated surface to finish the application and achieve an even appearance.
S748 Application Areas
Marble Floors
S748 can be used on suitable marble flooring to reduce the penetration of water, dirt, oil, and grease while enhancing the natural colour and structure of the stone.
Stone Countertops
Suitable stone countertops can benefit from S748’s impregnating treatment, helping reduce penetration from water, oil and grease while enhancing the appearance of the stone.
Bathroom Stone Surfaces
Use S748 on suitable bathroom stone surfaces to help reduce water and dirt penetration while enhancing the colour and structure of absorbent natural or artificial stone.
Interior Stone
S748 is suitable for interior stone applications, including polished, honed and textured surfaces where reduced penetration of staining substances and enhanced stone colour are desired.
Exterior Stone
For suitable exterior stone surfaces, S748 provides an impregnating treatment with UV resistance while helping reduce the penetration of water, dirt, oil and grease.
S748 vs. Standard Stone Sealer
| S748 | Standard Stone Sealer |
|---|---|
| Impregnating treatment | Formulation varies |
| Reduces penetration of water, dirt, oil and grease | Protection varies |
| Enhances colour and stone structure | Colour enhancement varies |
| Suitable for absorbent stone | Surface compatibility varies |
| Suitable for polished, honed and textured surfaces | Depends on product |
| UV resistant | Depends on formulation |
Why Choose StoneraShop for S748?
Genuine Imported Product
At StoneraShop, we offer the genuine imported S748 with clear details about its formulation, intended applications, stone compatibility, and technical characteristics.
Stone-Specific Guidance
We help you understand whether S748 is right for your stone, considering the material, surface finish, and intended application before you choose the treatment.
Clear Technical Information
We provide the product details you need to make an informed choice, including suitable stone types, compatible finishes, application steps, treatment time, and usage guidance.
Professional Application Support
S748 is intended for trained professionals, and we provide practical application information covering surface preparation, application, dwell time, excess removal, and buffing.
Complete Stone-Care Range
Our stone-care range goes beyond S748, giving you options for cleaning, protection and maintenance across different natural and artificial stone surfaces.
FAQs
S748 is a ready-to-use stone impregnator that reduces the penetration of water, dirt, oil, and grease while enhancing the colour and structure of suitable natural and artificial stone.
Yes. S748 is designed to enhance the colour and structure of suitable stone, helping bring out its natural appearance while providing impregnating protection.
Yes. S748 is suitable for marble and granite, along with limestone, gneiss, travertine, Solnhofen stone, terrazzo and agglomerate marble.
Yes. S748 is suitable for polished, honed and textured surfaces, making it adaptable to different stone finishes when the surface is compatible with the treatment.
S748 helps reduce the penetration of oil and grease into suitable absorbent stone surfaces, along with reducing the penetration of water and dirt.
S748 should remain on the surface for approximately 20–30 minutes. It should not be allowed to dry during this period, and excess product should then be removed.
Yes. The application instructions recommend repeating the treatment after approximately 24 hours as part of the recommended application process.
S748 is intended for suitable natural and artificial stone surfaces. Glazed tiles are not listed among the recommended applications, so surface compatibility should be confirmed before use.
S748 can be used on suitable stone countertops, including compatible natural and artificial stone surfaces. The surface should be properly cleaned, dry, and suitable for the treatment.
Maintain treated stone according to its material and finish, keeping the surface clean and following appropriate stone-care practices. Avoid products or methods that may affect the treatment.
