Previous product
7221 EPOXY 5 KGS SET
Rs. 9,330.00 Rs. 7,465.00
Back to products Back to products
Next product
5029 EPOXY 1.25 KG SET Rs. 1,942.00 Rs. 1,553.00

5029 EPOXY 5 KG SET

20% off
Rs. 7,475.00 Rs. 5,980.00
Add to wishlist
Add to compare
SKU: ISP02
Stonera
 All Products,Epoxy Resin for Marble,Epoxy System for Semiprecious Stone Processing,Epoxy System for White and Expensive Marble
Tags

An epoxy system for semiprecious stone slab processing and for crack filling of marble. 4kg of resin and 1kg of hardener.

Description

This epoxy can be used on expensive coloured marble. Since this epoxy have longer setting time, it fills cracks very well compared to other material and gives high gloss also. This epoxy is also given for semi-precious stone slab. Good stability to solar light.

Method of use

For making semi-precious slab

  1. Prepare the bed to make semi-precious stone slab and preheat it to 30-40°C temperature.
  2. Spread the semi-precious stones throughout the bed.
  3. Heat resin and hardener separately in water bath at 35-40°C.
  4. Mix resin and hardener in 4:1 ratio and pour in the bed to the required level.
  5. This will dry in 10-11 hours and we can polish the surface after 24-36 hours.

For white and other colour marble

  1. Grind the surface to grit 100 and leave them to dry for 16-20 hours so that absolutely no traces of water are found on the surface especially on cracks.
  2. Mix resin and hardener in the ratio 4:1 by a weight and apply the mixture uniformly on the full surface of marble.
  3. Accumulate additional quantity of this mixture over the cracks and holes.
  4. Leave the surface to dry for 10-11 hours.
  5. Start polishing starting from grit 100 after 24-36 hours.

 CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY

Product Information

Country of Origin Europe
Color–Resin (A part) Very clear
Color-Hardener (B part) Very clear
Form - Resin Liquid
Form- Hardener Liquid
Ratio 4:1
Resin 4 part
Hardener 1 part
Viscosity 40°C± 2°C of mixture Low
Gel time at 40°C± 2°C of mixture 120-140 minutes
Drying time/moving of slab 40°C ± 2°C 10-11 hours
Polishing of slab 24-36 hours
Unit pack 4kg of resin and 1kg of hardener
Category Epoxy system for semi precious stone slab and for crack filling of white and other marble

Key features

  1. Suitable for semi precious stone slabs as it is absolutely transparent with no bubble formation or shrinkage.
  2. Excellent crack filling epoxy for expensive white and coloured Italian and other marbles.