- No products in the cart.
Previous product
Back to products
Back to products
7737 EPOXY 1.25 KGS SET
Rs. 2,358.00 Rs. 1,886.00
Next product
7114 EPOXY 1.25KGS SET
Rs. 2,358.00 Rs. 1,886.00
7114 EPOXY 5 KGS SET
20% off
An epoxy system for crack filling white and other expensive marble. 4kg of resin and 1kg of hardener.
Description
Epoxies are applied on marble to fill the cracks, to increase hardness and gloss of the surface. This epoxy system is very good for filling cracks, pin holes and micro cracks found in natural stones. Has great adhesion and is best for marble lamination. Gives high gloss with no fish eyes, bubbles or blurry areas. This also has low yellowing property.
Method of Application
- Grind the surface to grit 100 and leave them to dry for 16-20 hours so that absolutely no traces of water are found on the surface especially on cracks.
- Mix resin and hardener in the ratio 4:1 by a weight and apply the mixture uniformly on the full surface of marble.
- Accumulate additional quantity of this mixture over the cracks and holes.
- Leave the surface to dry for 70-80 minutes.
- Start polishing starting from grit 100 after 24 hours.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
Key features
- Best epoxy for white marbles with no colour change.
- Excellent crack filler.
- Excellent lamination epoxy with high gloss and no bubbles.
| Country of Origin | Europe |
| Color – Resin (A part) | Clear |
| Color - Hardener (B part) | Faint yellow |
| Form - Resin | Liquid |
| Form - Hardener | Liquid |
| Ratio | 4:1 |
| Resin | 4 part |
| Hardener | 1 part |
| Viscosity at 25°C (in cps) Resin / Hardener | 600-700 / 100-150 |
| Gel time at 20°C the mixture | 35-40 minutes |
| Drying time/moving of slab 45°C | 70-80 minutes |
| Polishing of surface | 24 hours |
| Unit pack | 4kg of resin and 1kg of hardener |
| Category | Crack filling epoxy system for white and other expensive marbles |
