Previous product
Back to products
Back to products
LANTASHINE
Rs. 1,553.00 Rs. 1,242.00
Next product
S246 – COMPOSITE QUARTZ STAIN PROTECTION
Rs. 7,820.00 Rs. 6,256.00
S748 - STAIN PROTECTION-Premium Colour Lt 10
20% off
Special impregnator that reduces the penetration of water, dirt, oil and grease in all natural and artificial stone surfaces. 10 Litre.
Description
S748 is a ready to use special impregnator that reduces the penetration of water, dirt, oil and grease in all natural and artificial stone surfaces (soft and hard stones), agglomerates and terrazzo. S748 is suitable for use on polished, honed and textured surfaces. The colour and structure of the surface are significantly accentuated due to its colour enhancing properties. For interior and exterior use.
Method of Application
- Apply S748 generously and evenly onto the clean and dry surface using a soft brush or short pile roller.
- Leave for 20-30 minutes, but do not allow S748 to begin to dry.
- Afterwards, immediately and completely remove excess S748 using paper towels and rub the surface dry.
- Repeat the treatment after approx. 24 hours.
- Buff the surface by using cotton cloth and woolen buffing pad
Product Details
Country of Origin | Europe |
Color | Clear |
Form | Liquid |
Volume | 10 Litre |
Category | Stain protection premium colour |
Key features
- S748 is suitable for all absorbent natural and artificial stones, such as polished, honed or textured marble, limestone, travertine, solnhofen slabs, granite, gneiss, terrazzo, agglomerate marble etc.
- It is UV resistant and does not yellow with age.
- The effect of product like cola, wine and fruit juice is drastically reduced by the use of S748.
- For regular cleaning and continued protection use diluted ‘P324 Liquid Stone Soap’ once or twice a week.
- Once dry the residual material is not hazardous to health and is approved for use with food-stuffs by the LFGB (German Food and Feed Code).
- Non-absorbent surfaces, such as glazed tiles and the like, cannot be treated with this product.