- No products in the cart.
8115 EPOXY 5 KGS SET
20% off
An epoxy system for crack filling of expensive white and other colour marble. 4kg of resin and 1kg of hardener..
Description
Very good epoxy for white and coloured marble with high shine, non yellowing after long time. This epoxy we can use on expensive marbles like Onyx, Australian white, Carrara white, Satvario etc.
Method of Application
- Grind the surface to grit 100 and leave them to dry for 16-20 hours so that absolutely no traces of water are found on the surface especially on cracks.
- Mix resin and hardener in the ratio 4:1 by a weight and apply the mixture uniformly on the full surface of marble.
- Accumulate additional quantity of this mixture over the cracks and holes.
- Leave the surface to dry for 2-2.5 hours.
- Start polishing starting from grit 100 after 8 hours.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
| Country of Origin | Europe |
| Color - Resin (A part) | Clear |
| Color - Hardener (B part) | Clear |
| Form - Resin | Liquid |
| Form - Hardener | Liquid |
| Ratio: Resin Hardener |
4:1 Normal 4 Part 1 Part |
| Viscosity 40°C± 2°C of mixture | Low |
| Gel time at 40°C± 2°C of mixture | 70-80 minutes |
| Drying time/moving of slab 40°C ± 2°C | 2-2.5 hours |
| Polishing of surface | After 8 hours |
| Unit pack | 4kg of resin and 1kg of hardener | Category | Crack filling epoxy system for white and colour marble |
Key features
- Excellent epoxy system especially for expensive white marble.
- Fills all types of cracks, holes and pin holes.
- Dries fast and surface can be polished after 8 hours.
