- No products in the cart.
98011 EPOXY 3 KGS SET
20% off
An epoxy system for crack filling of light colour and dark coloured marble. 2kg of resin and 1kg of hardener.
Description
Filling and repairing pin holes, fissures and cracks. This gives high shine also.
Method of Application
- Grind the surface to grit 100 and leave them to dry for 16-20 hours so that absolutely no traces of water are found on the surface especially on cracks.
- Mix resin and hardener in the ratio 2:1 by a weight and apply the mixture uniformly on the full surface of marble.
- Accumulate additional quantity of this mixture over the cracks and holes.
- Leave the surface to dry for 2 hours.
- Start polishing starting from grit 100 after 24 hours.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
| Country of Origin | India |
| Color – Resin (A part) | Clear |
| Color – Hardener (B part) | Faint yellow |
| Form - Resin | Liquid |
| Form - Hardener | Liquid |
| Ratio | 2:1 |
| Resin | 2 part |
| Hardener | 1 part |
| Viscosity at 25°C (in cps) | Low |
| Gel time at 20°C | 45 minutes |
| Drying time 45°C | 2 hours |
| Polishing of surface | After 24 hours |
| Unit pack | 2kg of resin and 1kg of hardener |
| Category | Crack filling epoxy for light and dark colour marble |
Key features
- It maintains the natural look of the stones and colour of stone is improved.
- Fills pin holes and cracks in marble.
- Gives high gloss and increases the strength of stone.
