- No products in the cart.
EPOKITT EPOXY RESIN-5117/5118
20% off
Epoxy based joint filler for white marble. Set of 1.5kg resin and 0.75kg hardener.
Description
Epokitt epoxy resin is a product resulting from the reaction between liquid epichlorohydrin and bisphenol A, modified with a bifunctional reactive diluents. Due to low viscosity and low surface tension, it penetrates into very thin cracks and adheres very well to the surface. It is mainly used to fill joints for white colour marble. There is no need to mix any pigments and can be used directly on white marble. It can be used to fill the joints vertically and horizontally.
Method of use
- Grind the surface with 60 grit of abrasive or 50 grit of polishing pad.
- Thoroughly clean and dry the surface.
- Withdraw the appropriate amount of resin and half the quantity of hardener.
- Stir & mix them nicely and apply on the surface to be treated. Take the quantity of resin which can be applied within 15-20 minutes at a time.
- It starts getting gel in half an hour and completely dries in 2-4 hours.
- The surface can be polished after 4 hours starting from grit 120 of abrasives or 100 of polishing pad.
- Do not return unused catalyzed resin back to the tin.
- After use, close the tin in order to avoid hardening of resin on contact with air.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Information
| Country of Origin | Europe |
| Color of Resin | White |
| Color of Hardener | White |
| Consistency | Gel |
| Unit pack | 1.5kg resin and 750gm hardener |
| Ratio | 2:1 |
Key features
- 5117 / 5118 is a epoxy resin especially formulated to fill the joints in white marble.
- It does not change the colour for years.
- Suitable for white colour marble. If desired colour pigment can be added to match the stone colour.
- It enters the joints and cracks and adheres there so well that once it dries completely, the joints does not open.
- Gives a very high shine on polishing.
