- No products in the cart.
ILLUMINARE POLISHING POWDER-5kg
20% off
Polishing powder for final polishing and re-polishing of marble, agglomerate, marble-cement, terrazzo and limestone floors. 5kg.
Description
ILLUMINARE is a polishing powder for final polishing and re-polishing of marble, agglomerate, marble-cement, terrazzo and limestone floors. The product work on calcareous materials only. Illuminare hardens the surface and protects it from scratches and scrapes, giving a long lasing shine and restoring the beauty of the material.
Method of Application
- Spread ILLUMINARE on the floor manually in a circle, approximately a couple of square meters (approx.20 square feet). Position the single disc machine equipped with a natural fibre disc on the powder on the floor.
- Using a sprayer, or with solution tank water control, wet the floor with water and then turn on the floor machine and work water and ILLUMINARE into slurry. Add ILLUMINARE or water as necessary to maintain water slurry. Rotation of the machine may splatter the slurry, so take care to product adjoining areas of carpet, wood and walls.
- Work areas of not more than 1-2 square meters (15 – 20 square feet) at a time. Do not allow the slurry to dry on the floor at any time.
- After running the floor machine over the 15 – 20 square feet area 3 or 4 times, use 16’’ or 18’’ windows squeegee and pull across the area to check result. When a high polish in this area has been achieved, move the slurry with the squeegee to the next area to be polished.
- Rinse the floor with clean water and make sure all ILLUMINARE slurry has been removed from the surface and grout joints.
- Repeat polishing process using the same slurry by adding water or ILLUMNARE as needed, until the entire area has reached the desired polish.
- Wash the floor thoroughly with clean water and alkaline detergent and leave it to dry.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
| Country of Origin | Europe |
| Color | Yellowish green |
| Form | Powder |
| Uint pack | 5 kg |
| Category | Crystallizer for Marble |
Key features
- Ideal for final polishing and re-polishing of marble and other calcareous materials.
- Gives a long lasting shine and protects the surface from scratches.
- To be used after final polishing of marble on new or existing surface.
- We suggest to seal the surface with suitable sealant like ‘S234 Stain Protection’.
- We can maintain the floor stain free by cleaning the floor with diluted ‘P324 Stone Soap Solution’ once or twice a week.
