- No products in the cart.
Back to products
Back to products
Next product
7737 EPOXY 1.25 KGS SET
Rs. 2,358.00 Rs. 1,886.00
7737 EPOXY 5 KGS SET
20% off
An epoxy system for expensive marble with crack difficult to fill. 4kg of resin and 1kg of hardener.
Description
Epoxies are applied on marble and granite to fill the cracks, to increase hardness and gloss of the surface. This epoxy system is very good for filling cracks, pin holes and micro cracks found in natural stones. This resin system provides perfect impregnation of the surfaces, producing great adhesion to the stone. It provides high hardness and extra low yellowing effect under daily sun exposure.
Method of Application
- Grind the surface to grit 100 and leave them to dry for 16-20 hours so that absolutely no traces of water are found on the surface especially on cracks.
- Mix resin and hardener in the ratio 4:1 by a weight and apply the mixture uniformly on the full surface of marble.
- Accumulate additional quantity of this mixture over the cracks and holes.
- Leave the surface to dry for 2-2.5 hours.
- Start polishing starting from grit 100 after 24 hours.
CAUTION-TO BE USED BY TRAINED PROFESSIONALS ONLY
Product Details
| Country of Origin | Europe |
| Color – Resin (A part) | Clear |
| Color – Hardener (B part) | Faint yellow |
| Form - Resin | Liquid |
| Form - Hardener | Liquid |
| Ratio | 4:1 |
| Resin | 4 part |
| Hardener | 1 part |
| Viscosity at 25°C (in cps) Resin / Hardener | 400-500 / 100-120 |
| Gel time at 20°C the mixture | 50-75 minutes |
| Drying time/moving of slab 45°C | 120-160 minutes |
| Polishing of surface | After 24 hours |
| Unit pack | 4kg of resin and 1kg of hardener | Category | Crack filling epoxy system for white and other expensive marbles |
Key features
- Gloss and limpidity are achieved even for big clusters of resin in larger holes and cavities.
- This resin system offers a viscosity and surface tension which helps in filling all types of cracks in marble.
- Extra low yellowing effect under sun exposure.
